Supplymo
HS 2022 · 6-digit international code

HS Code 480256

6-digit classification for Weighing 40 G/m² or More But Not…, with duty lookup and 1688 checks before payment

Official description: Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and nonperforated punchcards and punchtape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803; handmade paper and paperboard : Other paper and paperboard, not containing fibres obtained by a mechanical or chemimechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres : Weighing 40 g/m² or more but not more than 150 g/m², in sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state

Also searched as: A3 paper, large format paper, drawing paper sheets, size paper

Official-source linksSame HS6 starting point worldwideBuilt for 1688 buyers

Classification

How 480256 breaks down

HS 2022
48Chapter

Paper and paperboard; articles of paper pulp

4802Heading

Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and nonperforated punchcards and punchtape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803; handmade paper and paperboard

480256Subheading

Weighing 40 g/m² or more but not more than 150 g/m², in sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state

Short answer

What HS code 480256 means before paying a 1688 supplier

HS code 480256 is the 6-digit HS 2022 starting point for weighing 40 g/m² or more but not more…; often searched as A3 paper, large format paper, drawing paper sheets. Before using it in a landed-cost estimate, confirm the product material, function, destination market, and the official tariff source. Treat any 1688 supplier code as a clue, not the final import classification.

Use

Start with this 6-digit HS code and compare the product's material, function, and use.

Verify

Check the destination market's official HTS, TARIC, commodity-code, duty, VAT, or GST source.

Decide

If classification, documents, or restricted-product risk is unclear, submit the product for a written check.

Covered products

What products fall under HS code 480256?

Buyers sourcing weighing 40 g/m² or more but not more than 150… from 1688 commonly describe it in these ways. If your product matches, 480256 is likely the right 6-digit starting point — confirm material and intended use against the official tariff.

A3 paperlarge format paperdrawing paper sheetssize paper

US import duty · China origin

US import duty for HS 480256

Published USITC HTS rates for weighing 40 g/m² or more but not more than 150… (480256), aggregated at the 6-digit level. A research estimate — the final rate depends on your full 8-10 digit HTS line.

Base MFN rate

0%

Average across 6 US national tariff lines under 480256.

Section 301 (China)

+25%

Covered lines under this code carry a Section 301 China surcharge.

Effective China-origin

25%

Base rate with applicable 301 surcharges — before MPF/HMF and any trade-action changes.

Source: USITC HTS (base MFN) + Section 301 overlay · data as of 2026-07-05 · rates change with trade actions — always confirm your full 10-digit line on hts.usitc.gov before pricing a product. Other markets (EU/UK/CA/AU/SG) below.

Import duty by market

Where to check the import duty for HS 480256

The 6-digit code is universal, but duty, VAT and GST are set by the destination country and depend on the full national tariff line with China as the country of origin. Start from the official source for your market.

Compare China-origin duty evidence across supported markets

Use the HS & import duty checker to estimate duty + VAT/GST for 480256 by destination before you pay a 1688 supplier.

Questions

HS code 480256: common questions

What is the US import duty for HS code 480256 from China?

As published in the USITC HTS (data as of 2026-07-05), the base MFN rate for 480256 averages about 0%, and Section 301 China surcharges apply on covered lines (up to +25%), bringing the effective China-origin rate to roughly 25% (averaged across 6 national tariff lines). This is a research estimate — the final rate depends on your full 8-10 digit HTS line; verify on hts.usitc.gov.

What is HS code 480256?

HS code 480256 is the World Customs Organization 6-digit HS 2022 subheading for "Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and nonperforated punchcards and punchtape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803; handmade paper and paperboard : Other paper and paperboard, not containing fibres obtained by a mechanical or chemimechanical process or of which not more than 10 % by weight of the total fibre content consists of such fibres : Weighing 40 g/m² or more but not more than 150 g/m², in sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state". The first two digits (48) are the chapter — Paper and paperboard; articles of paper pulp — and digits 3-4 (4802) are the heading. Countries add further digits (8-10) for their national tariff line.

What products fall under HS 480256?

Common products classified under 480256 include A3 paper, large format paper, drawing paper sheets, size paper and similar items matching weighing 40 g/m² or more but not more than 150…. The correct code still depends on the product's material, function and intended use.

How do I find the import duty for HS code 480256?

Duty is set by the destination country, not by the 6-digit HS code alone. Start from the official tariff of your market — USITC HTS (US), TARIC / Access2Markets (EU), GOV.UK Trade Tariff (UK), CBSA (Canada), ABF (Australia) or Singapore Customs — and look up the full national code with China as the country of origin.

Is HS code 480256 the same in every country?

The first 6 digits (480256) are the same worldwide under the WCO Harmonized System. Beyond that, each country extends the code (HTS in the US, TARIC in the EU, etc.) and sets its own duty and tax rates.

Can I trust the HS code a 1688 supplier gives me?

Treat a supplier-provided code as a clue, not a final classification. It can be incomplete, China-export-specific, or mismatched to your destination's rules. Verify against the official tariff and your product's actual material and use.

Is HSN code 480256 the same as HS code 480256?

Yes at the 6-digit level. India's HSN (Harmonized System of Nomenclature) uses the same WCO base, so HSN 480256 covers the same "weighing 40 g/m² or more but not more than 150…" scope; India then extends it to 8 digits for GST and customs. Check the Indian Customs tariff (CBIC) for the full national line.

Sourcing weighing 40 g/m² or more but not more than 150… from 1688?

Get a written pre-payment check — classification clues, China-origin landed cost, and supplier risk — before you commit. 5,754 HS codes covered.