HS Code 441113
6-digit classification for Medium MDF 6-9mm, with duty lookup and 1688 checks before payment
Official description: Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances : Medium density fibreboard (MDF) : Of a thickness exceeding 5 mm but not exceeding 9 mm
Also searched as: medium MDF 6-9mm, MDF 6mm, MDF 9mm, standard MDF
Classification
How 441113 breaks down
Wood and articles of wood; wood charcoal
Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances
Of a thickness exceeding 5 mm but not exceeding 9 mm
Short answer
What HS code 441113 means before paying a 1688 supplier
HS code 441113 is the 6-digit HS 2022 starting point for medium mdf 6-9mm; often searched as medium MDF 6-9mm, MDF 6mm, MDF 9mm. Before using it in a landed-cost estimate, confirm the product material, function, destination market, and the official tariff source. Treat any 1688 supplier code as a clue, not the final import classification.
Use
Start with this 6-digit HS code and compare the product's material, function, and use.
Verify
Check the destination market's official HTS, TARIC, commodity-code, duty, VAT, or GST source.
Decide
If classification, documents, or restricted-product risk is unclear, submit the product for a written check.
Covered products
What products fall under HS code 441113?
Buyers sourcing of a thickness exceeding 5 mm but not exceeding 9 mm from 1688 commonly describe it in these ways. If your product matches, 441113 is likely the right 6-digit starting point — confirm material and intended use against the official tariff.
US import duty · China origin
US import duty for HS 441113
Published USITC HTS rates for of a thickness exceeding 5 mm but not exceeding 9 mm (441113), aggregated at the 6-digit level. A research estimate — the final rate depends on your full 8-10 digit HTS line.
Base MFN rate
1.1%
Average across 5 US national tariff lines under 441113.
Section 301 (China)
+25%
Covered lines under this code carry a Section 301 China surcharge.
Effective China-origin
≈26.1%
Base rate with applicable 301 surcharges — before MPF/HMF and any trade-action changes.
Source: USITC HTS (base MFN) + Section 301 overlay · data as of 2026-07-05 · rates change with trade actions — always confirm your full 10-digit line on hts.usitc.gov before pricing a product. Other markets (EU/UK/CA/AU/SG) below.
Import duty by market
Where to check the import duty for HS 441113
The 6-digit code is universal, but duty, VAT and GST are set by the destination country and depend on the full national tariff line with China as the country of origin. Start from the official source for your market.
United States
USITC / CBP · Harmonized Tariff Schedule (HTS)
European Union
TARIC · Access2Markets
United Kingdom
HMRC · UK Integrated Online Tariff
Canada
CBSA · Canadian Customs Tariff
Australia
ABF · Australian customs tariff
Singapore
Singapore Customs · Singapore Trade Classification (HS)
Compare China-origin duty evidence across supported markets
Use the HS & import duty checker to estimate duty + VAT/GST for 441113 by destination before you pay a 1688 supplier.
Heading 4411
Other HS codes under 4411
Subheadings in the same 4-digit heading — "Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances". If 441113 is not an exact match, one of these may classify your product more precisely.
Questions
HS code 441113: common questions
What is the US import duty for HS code 441113 from China?
As published in the USITC HTS (data as of 2026-07-05), the base MFN rate for 441113 averages about 1.1%, and Section 301 China surcharges apply on covered lines (up to +25%), bringing the effective China-origin rate to roughly 26.1% (averaged across 5 national tariff lines). This is a research estimate — the final rate depends on your full 8-10 digit HTS line; verify on hts.usitc.gov.
What is HS code 441113?
HS code 441113 is the World Customs Organization 6-digit HS 2022 subheading for "Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances : Medium density fibreboard (MDF) : Of a thickness exceeding 5 mm but not exceeding 9 mm". The first two digits (44) are the chapter — Wood and articles of wood; wood charcoal — and digits 3-4 (4411) are the heading. Countries add further digits (8-10) for their national tariff line.
What products fall under HS 441113?
Common products classified under 441113 include medium MDF 6-9mm, MDF 6mm, MDF 9mm, standard MDF and similar items matching of a thickness exceeding 5 mm but not exceeding 9 mm. The correct code still depends on the product's material, function and intended use.
How do I find the import duty for HS code 441113?
Duty is set by the destination country, not by the 6-digit HS code alone. Start from the official tariff of your market — USITC HTS (US), TARIC / Access2Markets (EU), GOV.UK Trade Tariff (UK), CBSA (Canada), ABF (Australia) or Singapore Customs — and look up the full national code with China as the country of origin.
Is HS code 441113 the same in every country?
The first 6 digits (441113) are the same worldwide under the WCO Harmonized System. Beyond that, each country extends the code (HTS in the US, TARIC in the EU, etc.) and sets its own duty and tax rates.
Can I trust the HS code a 1688 supplier gives me?
Treat a supplier-provided code as a clue, not a final classification. It can be incomplete, China-export-specific, or mismatched to your destination's rules. Verify against the official tariff and your product's actual material and use.
Is HSN code 441113 the same as HS code 441113?
Yes at the 6-digit level. India's HSN (Harmonized System of Nomenclature) uses the same WCO base, so HSN 441113 covers the same "of a thickness exceeding 5 mm but not exceeding 9 mm" scope; India then extends it to 8 digits for GST and customs. Check the Indian Customs tariff (CBIC) for the full national line.
Chapter 44
Explore Wood and articles of wood; wood charcoal
Sourcing of a thickness exceeding 5 mm but not exceeding 9 mm from 1688?
Get a written pre-payment check — classification clues, China-origin landed cost, and supplier risk — before you commit. 5,754 HS codes covered.